Poe Injector Transform Ac Power To 48v Dc Power

Introduction

Reduce costs by using existing Cat5 cable to provide both power and data.
The INTELLINET NETWORK SOLUTIONS Power over Ethernet Injector allows you to connect your IEEE 802.3af-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af powered device (PD) to a switch.

Features

• Ideal when AC power is not available
• Distance support: up to 100 m (328 ft.)
• Power output of up to 15.4 Watts
• Supports all IEEE 802.3af-compliant PoE devices (Wireless LAN access points and bridges, VoIP (Voice over Internet Protocol) telephones, IP surveillance cameras)
• Supports IEEE 802.3af detection and short circuit, overload and high-voltage protection
• Full-power Class 3 PoE design
• Fanless design ideal for silent operation

Specifications

Standards

• IEEE 802.3af (Power over Ethernet)
• IEEE 802.3 (10Base-T Ethernet)
• IEEE 802.3u (100Base-TX Fast Ethernet)

General

• Media support:
  • 100Base-TX Cat5 UTP/STP RJ45, 8 pin
• Ports:
  • 1 RJ45 100 Mbps input port - 1 RJ45 100 Mbps data and power output ports - 1 power input connector (3 pin)
• Protection functions:
  • Short-circuit protection for short GND - Overload protection for currents over 450 mA - High-voltage protection for output voltage exceeding 52 V
• Compatibility - general: all IEEE 802.3af-compliant PoE devices
• Supported INTELLINET NETWORK SOLUTIONS products:
  • Wireless 300N Access Points (524735, 524711) - High Power Wireless G Access Point (503082) - PoE Splitter (502900) - Network Cameras (550932 NBCC30-IR, 550963 NFC30-IR, 550949 NFC30, 550987 NFD30, 551021 NFC31, 551045 NFC31-IR)

LEDs

• AC Powered (red)
• Channel Powered (green)
• Channel Alarm (red)

Power

• Input: 100 – 240 V AC, 50 – 60 Hz
• Output: 48 V DC / 350 mA
• Power consumption: 19 Watts (maximum)

Physical

• Plastic housing (ABS)
• Dimensions: 120 (L) x 50 (W) x 35 (H) mm (4.7 x 2.0 x 1.4 in.)
• Weight: 0.14 kg (0.3 lbs.)