TRIPP LITE HDMI over CAT6 Extender Kit for Medical Environments, 4K @ 60 Hz, HDR, 4:4:4, PoC, 70m TAA

Introduction

All-in-One HDMI Extender Kit Ideal for Medical Environments
This complete transmitter and receiver system is recommended for transmitting 4K video for medical applications in hospitals, clinics, physicians’ offices and other medical environments where the source and display are farther apart than conventional A/V cables allow. The extender kit conforms to strict EMI/RFI and ESD requirements.

Extends a 4K A/V Transmission Up to 230 ft.
The B127M-101-H extends 4K signals from an HDMI source device to an HDMI display up to 230 feet (70 meters) away via user-supplied Cat6 cabling.

Transmits Crystal-Clear 4K Video with Multi-Channel Audio
The HDCP 2.2-compliant B127M-101-H supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified by HDMI 2.0, with 36-bit Deep Color, 4:4:4 chroma subsampling and full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on a 4K display. Built-in equalization allows you to fine-tune the image quality at the remote display.

Meets EMI/RFI and ESD Requirements Necessary for Use in Medical Applications
The transmitter and receiver both meet CISPR 11- Group 1 Class A and IEC 61000-4-2 (ESD) Test level 4 standards for environments with strict EMI/RFI and ESD limitations. They are approved for medical applications where reducing electrical interference is vital to the proper functioning of equipment.

Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution
To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter’s local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.

Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks
Power over Cable (PoC) technology powers the receiver over Cat6 cable. LEDs on both units will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the receiver where needed without worrying about finding a nearby AC outlet.

Plug-and-Play Operation for Quick Setup and Immediate Use
The included transmitter and receiver work right out of the box with no software required. Mounting hardware is included for installing both units on a wall, pole or 19-inch rack. Connect the transmitter to the source with a user-supplied HDMI cable (such as Tripp Lite’s P568- or P569-Series). Then, connect the two units with user-supplied 26AWG STP Cat6/6a patch cable (such as Tripp Lite N262-Series). Finally, connect the receiver to the display with another user-supplied HDMI cable.

TAA-Compliant for GSA Schedule Purchases
The B127M-101-H is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Features

Type

AV transmitter & receiver

Maximum resolution

3840 x 2160 pixels

Cable types supported

Cat6,HDMI

Maximum transfer distance

70 m

Audio system

Multichannel

Extended display identification data (EDID)

Y

Audio output channels

7.1 channels

Electrostatic Discharge (ESD) protection

Y

Electrostatic Discharge (ESD) protection

8 kV

LED indicators

Y

Supported video modes

720p,1080p,2160p

Supported graphics resolutions

1280 x 720 (HD 720),1920 x 1080 (HD 1080),3840 x 2160

Cable length

1.381 m

HDCP

Y

Material

Metal

Colour depth

36 bit

3D

Y

HDCP version

1.4/2.2

Product colour

Black

Ports & interfaces

Connectivity technology

Wired

Ethernet LAN

Y

RJ-45 input ports

1

RJ-45 output ports

1

HDMI in

1

Number of HDMI outputs

2

HDMI version

2.0

DC-in jack

Y

Power

AC input voltage

100 - 240 V

AC input frequency

50/60 Hz

Operating voltage

24 V

Input current

0.6 A

Output current

1 A

Operational conditions

Operating temperature (T-T)

0 - 40 °C

Storage temperature (T-T)

-15 - 50 °C

Operating relative humidity (H-H)

0 - 85%

Storage relative humidity (H-H)

0 - 85%

Weight & dimensions

Receiver dimensions (WxDxH)

115 x 62.4 x 27 mm

Receiver weight

450 g

Transmitter dimensions (WxDxH)

115 x 62.4 x 27 mm

Transmitter weight

450 g

Packaging data

Package width

260.1 mm

Package depth

164.1 mm

Package height

55.1 mm

Package weight

760 g

Package type

Box

Packaging content

AC adapter included

Y

Cables included

AC

Included power plug types

AU,EU,NA,UK

Manual

Y

Mounting kit

Y

Technical details

Country of origin

Taiwan

Sustainability compliance

Y

Sustainability certificates

CE, REACH, RoHS

Logistics data

Master (outer) case width

573 mm

Master (outer) case length

273 mm

Master (outer) case height

175 mm

Master (outer) case gross weight

7.9 kg

Products per master (outer) case

10 pc(s)

Master (outer) case GTIN (EAN/UPC)

10037332262674