Srs-1110-gsc10 Media Converter10/100/1000base-t Dual (05092110)

Introduction

SRS-1110-G DIN Rail Media Converters

Perle SRS-1110-G DIN Rail Media Converters transparently connect UTP CAT5/6/7 copper to Gigabit dual or single fiber in electric utility and power substation environments. With an extended operating temperature range of -40°C to +75°C and advanced electrical certifications for IEC 61850-3, IEEE1613 and EN 61000-4-16, these fiber to Ethernet converters meet all requirements necessary to operate safely in the harsh electrical environments associated with power utility and substation deployments. The SRS Media Converters are also designed to operate in hazardous industrial locations. With numerous certifications, including ATEX Class 1 Zone 2 and ANSI/ISA 12.12.01 Class 1 Division 2, you are ensured safe and reliable operation in locations where flammable gases, liquids or vapors are handled, processed or used.
Extend the data transmission distance of IP-based devices by connecting their 10/100/1000Base-T copper interface to Gigabit fiber.
Extend the distance of an existing industrial network by linking CAT5/6/7 cabling to multimode or single mode fiber.
Extend the distance between two copper-based devices or networks
Protect Ethernet data from EMI noise and interference by inter-connecting your copper-Ethernet devices over fiber in industrial plants.

SRS-1110 Media Converters are also available with support for an SFP slot.

Network Administrators can "see-everything" with Perle's advanced features such as Auto-Negotiation, Auto-MDIX, Link Pass-Through, Far End Fault, and Pause which make the end to end link completely transparent. This allows for more efficient troubleshooting and less on-site maintenance. These cost and time saving features, along with a lifetime warranty and free worldwide technical support, make SRS-1110-G Rate Converting Media Converters the smart choice for IT professionals.

Network

Maximum data transfer rate

1000 Mbit/s

Converter input interface

10Base-T, 100Base-T, 1000Base-T

Converter output interface

1000Base-X

Ethernet interface type

Fast Ethernet, Gigabit Ethernet

Fiber ethernet cabling technology

1000BASE-LX, 1000BASE-LH

Auto MDI/MDI-X

Yes

Auto-negotiation

Yes

Duplex system

Full, Half

Cable types supported

Cat5, Cat6, Cat7

Performance

Maximum transfer distance

10000 m

Wavelength

1310 nm

Fiber mode structure

Multi-mode, Single-mode

Fiber cable diameters supported (core/cladding)

62.5/125,50/125 µm

Tx power (min)

-9.5 dBmW

Tx power (max)

-3 dBmW

Rx power (min)

-20 dBmW

Rx power (max)

-3 dBmW

Buffer size

1000 KB

Mean time between failures (MTBF)

577432 h

Features

Internal

Yes

LED indicators

Yes

Product colour

White, Grey

Housing material

Plastic

International Protection (IP) code

IP20

DIN rail mounting

Yes

Ports & interfaces

Ethernet LAN (RJ-45) ports

1

Fiber ports quantity

2

Fiber optic connector

SC

Power

Input voltage

12 - 48 V

Input current

0.09 A

Power consumption (typical)

2.16 W

Weight & dimensions

Width

22.5 mm

Depth

100 mm

Height

114 mm

Weight

120 g

Operational conditions

Operating temperature (T-T)

-40 - 75 °C

Storage temperature (T-T)

-40 - 85 °C

Operating relative humidity (H-H)

5 - 90%

Storage relative humidity (H-H)

5 - 95%

Operating altitude

0 - 3048 m

Packaging data

Package width

30 mm

Package depth

105 mm

Package height

145 mm

Package weight

170 g

Certificates

Compliance certificates

ATEX, ANSI, Federal Communications Commission (FCC), UL, CSA, CE, Trade Agreements Act (TAA), National Defense Authorization Act (NDAA)

Other features

MAC address table

1026 entries