Sr-1110-sc10-xt Media Convertr10/100/1000base-t Dual S (05091920)

Introduction

SR-1110-XT DIN Rail Media Converters

Perle SR-1110-XT DIN Rail Media Converters transparently connect UTP copper to fiber in industrial grade operating temperatures -40F to +167F (-40C to +75C). Equipment found in traffic management, oil and gas pipelines, weather tracking, industrial and outdoor applications must function in temperatures that cannot be supported by a commercial based media converter. These Rate Converting Media Converters are ideal for use with industrial devices subjected to harsh environments and severe temperatures such as security cameras, wireless access points, alarms, traffic controllers, sensors and tracking devices.
Extend the data transmission distance of IP-based devices by connecting their 10/100/1000Base-T copper interface to gigabit fiber.
Enable Gigabit speeds across a multimode fiber link up to 2km in length (learn more)
Extend the distance of an existing industrial network by linking CAT5/6/7 cabling to multimode or single mode fiber.
Protect Ethernet data from EMI noise and interference by inter-connecting your copper-Ethernet devices over fiber in industrial plants.

An SR-1110-XT Media Converter is also available with an SFP slot.

Network Administrators can "see-everything" with Perle's advanced features such as Auto-Negotiation, Auto-MDIX, Link Pass-Through, Far End Fault, and Pause which make the end to end link completely transparent. This allows for more efficient troubleshooting and less on-site maintenance. These cost and time saving features, along with a lifetime warranty and free worldwide technical support, make SR-1110-XT Rate Converting Media Converters the smart choice for IT professionals.

Network

Maximum data transfer rate

1000 Mbit/s

Converter input interface

10Base-T, 100Base-T, 1000Base-T

Converter output interface

1000Base-X

Ethernet interface type

Fast Ethernet, Gigabit Ethernet

Fiber ethernet cabling technology

1000BASE-LX, 1000BASE-LH

Auto MDI/MDI-X

Yes

Auto-negotiation

Yes

Duplex system

Full, Half

Cable types supported

Cat5, Cat6, Cat7

Performance

Maximum transfer distance

10000 m

Wavelength

1310 nm

Fiber mode structure

Multi-mode, Single-mode

Fiber cable diameters supported (core/cladding)

62.5/125,50/125 µm

Tx power (min)

-9.5 dBmW

Tx power (max)

-3 dBmW

Rx power (min)

-20 dBmW

Rx power (max)

-3 dBmW

Buffer size

1000 KB

Mean time between failures (MTBF)

564766 h

Features

Internal

Yes

LED indicators

Yes

Product colour

White, Grey

Housing material

Plastic

International Protection (IP) code

IP20

DIN rail mounting

Yes

Ports & interfaces

Ethernet LAN (RJ-45) ports

1

Fiber ports quantity

2

Fiber optic connector

SC

Power

Input voltage

12 - 48 V

Input current

0.09 A

Power consumption (typical)

2.16 W

Weight & dimensions

Width

22.5 mm

Depth

100 mm

Height

114 mm

Weight

120 g

Operational conditions

Operating temperature (T-T)

-40 - 75 °C

Storage temperature (T-T)

-40 - 85 °C

Operating relative humidity (H-H)

5 - 90%

Storage relative humidity (H-H)

5 - 95%

Operating altitude

0 - 3048 m

Packaging data

Package width

30 mm

Package depth

105 mm

Package height

145 mm

Package weight

170 g

Certificates

Compliance certificates

Trade Agreements Act (TAA), National Defense Authorization Act (NDAA), Federal Communications Commission (FCC), ICES, UL, CSA, CE

Other features

MAC address table

1024 entries