S-1110hp-dsfp - Gigabit Media And Rate Converter With Type 4 H (05079351)

Introduction

S-1110HP-SFP Hi-PoE Media Converters

Perle S-1110HP-SFP Fiber Media Converters transparently connect copper to fiber while providing up to 100 Watts of IEEE 802.3bt compliant Hi-PoE PSE power to standards-based compliant devices such as pan-tilt-zoom (PTZ) security cameras with heaters, LED lighting in building management, and 802.11ax/ac wireless access points. Perle Hi-PoE Media Converters are classified as Power Sourcing Equipment (PSE). While using standard UTP cables that carry Ethernet data, Perle Hi-PoE media converters provide power to Powered Devices (PDs) that support the IEEE 802.3bt PoE standard (up to 100W of power) or pre-standard solutions including UPoE, 4PPoE, PoE++, UltraPoE, 4 Pair PoE, etc. As this standard is fully backwards compatible with the existing IEEE 802.3af PoE and IEEE 802.3at PoE+ standards, all of those PD's are also supported. The S-1110HP-SFP Fiber Media Converter features single or dual 10/100/1000Base-T RJ45 ports to power one or two PD’s per converter. Learn more about PoE And, with one or two empty transceiver ports on the S-1110HP-SFP Fiber Media Converter, flexible network configurations requirements can be meet using a variety of transceivers supplied by Perle, Cisco, or other manufacturers of MSA compliant SFPs.
extend the life of non-fiber based equipment by enabling data transmission from 10/100/1000Base-T devices over 100/1000Base-X fiber
extend the distance of an existing network by linking CAT5/6/7 cabling to multimode or single mode fiber
protect Ethernet data from EMI noise and interference by inter-connecting your copper-Ethernet devices over fiber.
Network Administrators can "see-everything" with Perle's advanced features such as Auto-Negotiation, Auto-MDIX, Link Pass-Through, Fiber Fault Alert, and Loopback. This allows for more efficient troubleshooting and less on-site maintenance. These cost and time saving features, along with a lifetime warranty and free worldwide technical support, make Perle S-1110HP-SFP PoE Media Converters the smart choice for IT professionals.

Network

Maximum data transfer rate

1000 Mbit/s

Converter input interface

10Base-T, 100Base-T, 1000Base-T

Converter output interface

1000Base-X, 100Base-X

Networking standards

IEEE 802.3bt, IEEE 802.11ax, IEEE 802.11ac, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u

Jumbo frames support

Yes

VLAN support

Yes

Auto MDI/MDI-X

Yes

Auto-negotiation

Yes

Duplex system

Full, Half

Cable types supported

Cat5, Cat6, Cat7, Cat3

Performance

Buffer size

1000 KB

Mean time between failures (MTBF)

324134 h

Features

LED indicators

Yes

Product colour

Black

Housing material

Metal

International Protection (IP) code

IP20

Power protection features

Over current

Ports & interfaces

Connectivity technology

Wired

Fiber ports quantity

2

Fiber optic connector

SFP

Power over Ethernet (PoE) ports quantity

1

Power

Input voltage

52 - 57 V

Power consumption (typical)

4.7 W

Power over Ethernet (PoE)

Yes

Total Power over Ethernet (PoE) budget

100 W

Weight & dimensions

Width

95 mm

Depth

150 mm

Height

26 mm

Weight

400 g

Operational conditions

Operating temperature (T-T)

0 - 50 °C

Storage temperature (T-T)

-25 - 70 °C

Operating relative humidity (H-H)

5 - 90%

Storage relative humidity (H-H)

5 - 95%

Operating altitude

0 - 3048 m

Packaging data

Package width

200 mm

Package depth

70 mm

Package height

300 mm

Package weight

1.36 kg

Certificates

Compliance certificates

UL, Federal Communications Commission (FCC), CE, CSA

Other features

MAC address table

1024 entries