DM Essentials 4K Transmitter - USB-C DisplayPort USB 2.0 - Ethernet Signal Extension over CATX Cable

Introduction

The HD-TXU-4KZ-111-E is a DM® Essentials 4K60 4:4:4 transmitter designed to interoperate with a DM Essentials HD-RXU-4KZ Series receiver. A USB-C® input with DisplayPort™ Alt Mode capability enables signal extension of a DisplayPort AV signal along with USB 2.0 data. This is useful in applications where an AV source is located remotely from its destination, such as a display, projector, or codec solution. A CAT5e or higher twisted pair cable must be used to connect the HD-TXU-4KZ-111-E to the DM Essentials receiver.

Interoperability with a DM Lite HD-RXU-4KZ Series Receiver

For interoperability between the HD-TXU-4KZ-111-E and an HD-RXU-4KZ Series receiver, the DM Essentials output port of the HD-TXU-4KZ-111-E must be connected to the DM Essentials input port of the HD-RXU-4KZ Series receiver.

NOTE: USB 2.0 data extension is not supported if the HD-TXU-4KZ-111-E is paired with a DM Essentials receiver other than an HD-RXU-4KZ Series receiver or paired with a DMPS Essentials switcher (HD-PS Series or HD-RX-4K-210-C-E[-POE]).

4K60 4:4:4 and HDR Support

The HD-TXU-4KZ-111-E supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.

USB 2.0 Data Extension

Two USB 2.0 host ports are provided on the HD-TXU-4KZ-111-E, enabling connection to a wide variety of supported USB 2.0 peripheral devices.

Ethernet Pass-Through Capability

The HD-TXU-4KZ-111-E is equipped with a 100/1000 Mbps LAN port that passes an Ethernet signal over the DM Lite connection to the receiving endpoint. The LAN port of one endpoint in the pair can be connected to an Ethernet network while the LAN port of the other endpoint can be connected directly to an Ethernet-enabled device such as a PC.

Compact, Surface-Mountable Design

Compact in design, the HD-TXU-4KZ-111-E can be mounted onto a flat surface such as the underside of a table, behind a credenza, or inside a podium. It can also be attached to a single rack rail in the back of an equipment cabinet. The HD-TXU-4KZ-111-E can receive power from the included power pack or from the remote DM Essentials receiver.

Features

Type

AV receiver

Maximum resolution

4096 x 2160 pixels

Cable types supported

Cat5e

Maximum transfer distance

70 m

High Dynamic Range (HDR) supported

Yes

High Dynamic Range (HDR) technology

Dolby Vision, High Dynamic Range 10 (HDR10), High Dynamic Range 10+ (HDR10 Plus)

Maximum refresh rate

60 Hz

HDCP pass-through

Yes

CEC pass-through

Yes

LED indicators

Activity, Link, Power

Supported graphics resolutions

1920 x 1080 (HD 1080), 2560 x 1600 (WQXGA), 3840 x 2160, 4096 x 2160

Audio formats supported

DTS, LPCM

HDCP

Yes

Material

Metal, Polycarbonate (PC)

Colour depth

12 bit

Rack mounting

Yes

Frame rate

60 fps

HDCP version

2.3

Product colour

White

Ports & interfaces

Connectivity technology

Wired

Ethernet LAN

Yes

RJ-45 input ports

1

Number of HDMI outputs

1

Power

Power source type

AC

AC input voltage

100 - 240 V

Current

2.5 A

Operational conditions

Operating temperature (T-T)

0 - 40 °C

Operating relative humidity (H-H)

20 - 90%

Weight & dimensions

Width

106 mm

Depth

202 mm

Height

30 mm

Weight

550 g

Packaging content

Cables included

UTP

IR extender included

Yes

IR emitter included

Yes

Mounting brackets included

Yes

Technical details

Compliance certificates

CE, Federal Communications Commission (FCC)